A13 Board ID TJ-p860-v7.1 Firmware Download Link And How to Flash Firmware Using Phoenix Suit

Board TJ-p860-v7.1

Download:

A13 Board TJ-p860-v8.1 Firmware

How to Flash Firmware Using Phoenix Suit

1.Install PhoenixSuit by running the installer program PhoenixSuitPacket_v1.0.8.zip (the file name may vary depending on the program version) on your computer. The installer is in Chinese, but it’s quite straightforward pushing next button (situated on the right side) until the installation completes.

2.After finish installing,Open Phoenix suit

3.Click Firmware and Open image as shown in the picture

4.Browse for the Firmware file you downloaded and click open

Browse for the Firmware file you downloaded and click open

5.Now,Connect tablet while pressing Volume up and Volume down to USB Cable.Flashing will now start

Connect tablet while pressing Volume up and Volume down to USB Cable

6.Once the tablet has entered in flash mode, you should see the dialog and Please click Yes button to allow Format mode.

7.Wait until complete flashing!Your tablet may start configured in Chinese

Firmware Upload Successful